Jm Roll Tarp GRAVITY BOX (Since 2011) Manuel d'utilisateur télécharger pdf (Page 7)

STEP 1 - HANGER

STEP 2 - ENDCAPS ASSEMBLY

2.1 Aside from the gravity box, match up the holes on the Front Endcap Arch with the top Front Endcap

Plate holes.

2.2 Install the Nylon Strip Opposite Chute Side (OCS) using 1/4” x 5/8” bolts and 1/4” serrated ange nuts.

2.3 Insert 1/4” x 1/2” bolts in the remaining holes. Fasten with 1/4” serrated ange nuts.

2.4 Repeat Steps 2.1 - 2.3 for the back endcap arch and plate.

-NOTE: Since there is no wind lip on the back endcap, it doesnt include a Nylon Strip so only 1/4”

x 1/2” bolts should be used.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Jm Roll Tarp GRAVITY BOX (Since 2011) Manuel d'utilisateur Page 7