Jm GRAIN CARTS Leaner Setup Manuel d'utilisateur télécharger pdf (Page 11)

Use the Hanger Bracket to mark and drill four 3/8” holes on the rear of the cart as shown above.

The 29 3/4” dimension is from the top of the shell, not the top of the sideboard. Attach the hanger

bracket to the back wall with four 3/8”-16 x 1” serrated ange hex bolts and four 3/8”-16 serrated

ange hex nuts.

-10-

Use one 1/2”-13 x 1 1/4” hex bolt and one 1/2”-13 centerlock hex nut to bolt the tarp crank handle

hanger hook to the hanger bracket. Do not completely tighten the bolt for the hanger hook. This

hook needs to swing freely.

STEP - T2.0

STEP - T1.0

LEANER MODEL GRAIN CART TARP INSTALLATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Jm GRAIN CARTS Leaner Setup Manuel d'utilisateur Page 11