Jm GC-24T Assembly Manuel d'utilisateur télécharger pdf (Page 38)

GC24t-1 Grain Cart assembly

-38-

STEP - 73

STEP - 72

Install the auger top tube assembly and pivot pin with 1/2” x 1-1/2” bolts, extra large washers

and lock nuts. Be sure to match numbers that are welded on the hinge plates of both the bottom

and top tub assemblies (if top tube has a 7 it goes with the bottom tube that has a 7).

Install the adjustable auger rest pad. First install the adjustable auger bolt on rest plate. Use (4) M10 x 25

MM serrated hex head bolts and (4) M10 serrated hex ange nuts. Next attach the adjustable auger rest.

Use (2) M10 x 40 MM, (2) M10 nylon washers, and (2) M10 serrated hex ange nuts. The washers go onto

the slotted side.

Adjust auger rest pad. Move

the rest pad up or down until

both circled points in the im-

age above are touching the

rest pad. Then drill through

the shell in the remaining

holes. Use (4) M10 x 40 hex

bolts and (4) M10 nylon

locking hex nuts.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Pas de commentaire

Jm GC-24T Assembly Manuel d'utilisateur Page 38