Jm TB-3500-6000H Manuel d'utilisateur

Pg. 1 O P E R A T O R ’ S M A N U A L Set-Up Instructions and Parts Catalog for Models TB-3500H and TB-6000H Trail-Blazer Header Transports

Pg. 10 SET-UP INSTRUCTIONS (continued) 4. Mounting the Front Axle Assembly Mount two wheels and tires to the hubs on the Ball Hitch Tongue and Axle

Pg. 11 SET-UP INSTRUCTIONS (continued) 7. Installing the Light Kit and Wiring Harnesses A. Insert the Main Wiri

Pg. 12 SET-UP INSTRUCTIONS (continued) D. Exit the Main Wiring Harness and corresponding brakes and light wires at the grommets located on each side

Pg. 13 SET-UP INSTRUCTIONS (continued) 8. Placing the Red and Silver Reflective Decals Place the reflective red and silver decals on the along sides

Pg. 14 PARTS LIST Main Frame and Upper Bar Front Axle Assembly # Part # Description 2 UB-24H 4" x 8" x 24' Upp

Pg. 15 PARTS LIST Tie-Down Bracket and Adjustable Header Mount Adjustable Upper Bar Mount # Part # Descr

Pg. 16 PARTS LIST

Pg. 17 PARTS LIST Light Kit and Wiring Diagram Parts List # Part # Description # Part # Description 1 MWH-HS

Pg. 18 PARTS LIST Light Kit and Wiring Diagram Parts List (continued) # Part # Description # Part # Description 17 ----- -----------------------

Pg. 19 INITIAL OPERATION / MAINTENANCE BE CERTAIN THAT ALL POWER IS SHUT OFF BEFORE SERVICING THE HEADER TRANSPORT Before the header transport is put

Pg. 2 TO THE DEALER: Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Oper

Pg. 20 REPORTING SAFETY DEFECTS J. & M. Manufacturing Co., Inc. P.O. Box 547 Fort Recovery, OH 45846 Reporting Safety Defects If you believe t

Pg. 21 SERVICE / MAINTENANCE RECORD Date Description Notes

Pg. 3 MODELS TB-3500H and TB-6000H Header Transports Specifications DIMENSIONS (by Upper Bar Length) 32’ 38’ 4

Pg. 4 GENERAL INFORMATION TO THE OWNER: The purpose of this manual is to assist you in operating and maintaining your running gear in a safe manner.

Pg. 5 GENERAL INFORMATION (continued) BOLT TORQUE CHART Always tighten hardware to these values unless a different torque or tightening procedure is

Pg. 6 TABLE OF CONTENTS INTRODUCTION 2 EXPRESS WARRANTY 2 SPECIFICATIONS 3 GENERAL INFORMATION 4 BOLT TORQUE CHART 5 SAFETY RULES 7 SAFETY 7 SAFE

Pg. 7 SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!  Safety is a primary concern in the design and manufacture of our products.

Pg. 8 SAFETY SIGNS ATTENTION: BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged or Missing! IMPORTANT: Install new safety signs

Pg. 9 SET-UP INSTRUCTIONS IMPORTANT: Set-up work to be performed by qualified servicemen only. 1. Mounting the Rear Axles Secure the Dura-Flex Axl